
Mold remediation & prevention
Mold Remediation After Water Damage
Mold follows water. Remediation fixes the moisture problem first, then contains the area, removes mold-damaged materials under HEPA filtration and cleans what remains, so the problem doesn't come back.
- Moisture source found and fixed
- Containment & negative air pressure
- HEPA filtration and removal
- Clearance before rebuilding
Talk to someone now
(877) 536-1357- 1Call and describe the damage
- 2Get matched with a local company
- 3Extraction and drying get started
Free call, answered 24/7. We connect you with independent local restoration companies. How it works
- Answered 24/7/365Nights, weekends and holidays
- Every type of water lossLeaks, floods, sewage and mold
- Insurance-ready recordsPhotos, moisture logs, scope
- Local companiesCrews that serve your ZIP
When to call
Signs you need mold remediation
Small spots on a bathroom tile can be cleaned. These signs point to a larger problem connected to moisture.
Visible growth on walls or ceilings
Black, green, gray or white patches on drywall, ceilings, cabinets or wood, especially after a leak.
A leak that wasn't dried quickly
Materials that stayed wet for more than a day or two after a leak or flood are at high risk.
Musty odor with no visible source
Mold inside walls, under flooring or in crawl spaces is often smelled before it's seen.
Growth around HVAC vents
Mold on supply registers or in air handlers can spread spores through the house.
Peeling paint or warped materials
Bubbling paint, soft drywall and warped baseboards often mean long-term moisture behind the surface.
Symptoms that improve when you leave
Allergy-like symptoms that ease away from home can be a reason to investigate. Talk to a doctor about health concerns.
What’s included
How professional mold remediation works
Remediation follows the EPA's guidance and industry standards such as IICRC S520. The goal is to remove mold growth and correct the moisture that caused it.

-
1
Inspection and moisture source
The area of growth is mapped and the moisture source — leak, condensation, flooding or humidity — is identified and corrected.
-
2
Containment
Plastic sheeting and zipper doors seal the work area, often under negative air pressure, so spores don't spread to clean rooms.
-
3
HEPA air filtration
Air scrubbers with HEPA filters capture airborne spores during and after the work.
-
4
Removal of moldy materials
Porous materials with growth — drywall, insulation, carpet — are cut out and bagged inside the containment.
-
5
Cleaning and HEPA vacuuming
Framing and non-porous surfaces are HEPA-vacuumed and cleaned; treatments are applied where appropriate.
-
6
Drying and clearance
The area is dried and visually inspected; in many cases independent clearance testing confirms success before rebuilding.
Mold is a moisture problem first
Mold spores are everywhere, indoors and out. They only become a problem when they land on something that stays wet. That’s why the EPA’s guidance starts with one rule: fix the water problem. Removing mold without fixing the leak, condensation or humidity behind it means it will grow back.
Most mold calls start with water damage that wasn’t dried completely: a slow leak inside a wall, a flooded basement dried with household fans, a roof leak that soaked insulation, or a crawl space with standing water.
How big is the problem?
| Situation | Typical approach |
|---|---|
| Small spots on non-porous surfaces (under about 10 sq ft), clean-water source | Homeowner cleaning with detergent, gloves and an N95, after the moisture source is fixed |
| Growth on drywall, insulation or wood across a larger area | Professional remediation with containment and removal of affected materials |
| Mold after flooding or sewage | Professional remediation; contaminated porous materials removed |
| Mold in HVAC systems or ductwork | Professional HVAC cleaning and remediation; don’t run the system |
| Musty odor with no visible growth | Inspection with moisture meters and thermal imaging, possibly testing |
What not to do
- Don’t disturb large areas of mold by scraping, sanding or tearing out drywall without containment — that spreads spores through the house.
- Don’t paint over mold. It keeps growing underneath and bleeds through.
- Don’t rely on bleach for porous materials; it doesn’t remove growth inside drywall or wood.
- Don’t run the HVAC if mold is in or near the air handler or ducts.
Mold licensing varies by state
Several states regulate mold work. Florida’s DBPR licenses mold assessors and remediators separately, and an assessor can’t remediate a property it assessed. Texas requires TDLR licenses for most projects of 25 contiguous square feet or more, with a licensed assessor writing the protocol and a separate licensed remediator doing the work. Other states have no specific mold license but require general contractor registration for the rebuild. Our city pages list the licensing resources for each state we serve.
Mold testing: when it helps
If you can see mold, you generally don’t need a test to know it should be removed. Testing is most useful when you smell mustiness but can’t find growth, when you need independent confirmation that remediation worked (clearance testing), or when a state’s rules require an assessment. Be cautious of anyone who offers to test and then remediate based solely on their own results.
What affects mold remediation cost
- The size of the affected area and how many rooms need containment.
- Access: crawl spaces and attics take more labor.
- Materials that must be removed and replaced.
- Whether the moisture source needs separate repair (plumbing, roofing, drainage).
- Independent assessment and clearance testing, where required or requested.
Preventing mold after water damage
The best mold remediation is the one you never need. After any water loss, get water extracted quickly, dry the structure with dehumidifiers until moisture readings are normal, and don’t close walls or install new flooring over wet materials. Keep indoor humidity below about 60 percent, fix leaks promptly, and vent bathrooms and dryers outside. See our water damage restoration page for how proper drying works, and our guide on whether water damage leads to mold.
How it works
From your call to a dry home
Professional water damage restoration follows the IICRC S500 standard. Here is what a properly run job looks like.
-
1
You call, we listen
Tell us where the water is, what caused it (if you know), when it started and whether it is still running. Your call is routed to an available restoration company that serves your ZIP code.
-
2
Inspection & moisture mapping
A technician confirms the source is stopped, classifies the water as clean, gray or black, and uses moisture meters and thermal imaging to find wet materials you can’t see.
-
3
Extraction & structural drying
Standing water is extracted, materials that can’t be saved are removed, and air movers and dehumidifiers dry the structure. Readings are logged every day until materials are dry.
-
4
Cleanup, records & repair
Affected areas are cleaned and treated where needed. You get photos, moisture logs and a written scope for your insurer, then repairs and rebuild can begin.
Service areas
Mold Remediation near you
Choose your city for local details: common causes, neighborhoods and ZIP codes served, local resources and answers to local questions.
Arizona
Florida
Georgia
Massachusetts
Tennessee
Texas
- Mold Remediation in Allen, TX
- Mold Remediation in Conroe, TX
- Mold Remediation in Denton, TX
- Mold Remediation in Flower Mound, TX
- Mold Remediation in Frisco, TX
- Mold Remediation in Katy, TX
- Mold Remediation in Kingwood, TX
- Mold Remediation in Lewisville, TX
- Mold Remediation in Magnolia, TX
- Mold Remediation in McKinney, TX
- Mold Remediation in Montgomery, TX
- Mold Remediation in Plano, TX
- Mold Remediation in Spring, TX
- Mold Remediation in Tomball, TX
Utah
FAQ
Mold Remediation FAQs
Still unsure what you need? A two-minute call usually answers it.
How quickly does mold grow after water damage?
The EPA recommends drying wet materials within 24 to 48 hours to help prevent mold growth. Warm, humid conditions speed growth, and materials that stay wet for several days are very likely to develop mold.
Can I clean mold myself?
The EPA suggests homeowners can usually handle mold covering less than about 10 square feet if it isn't connected to sewage or contaminated water. Larger areas, mold in HVAC systems, mold after flooding or sewage, or growth inside walls should be handled by professionals.
Does bleach kill mold?
Bleach can discolor surface mold on non-porous surfaces, but it doesn't remove growth from porous materials like drywall and wood, and its fumes can be harmful. Professional remediation removes moldy porous materials and cleans surfaces rather than relying on bleach.
Do I need mold testing?
If mold is visible, testing usually isn't needed to decide that it should be removed. Testing can help when there's a musty odor but no visible growth, or for clearance after remediation. In some states, assessment must be done by a separately licensed assessor.
Is mold remediation covered by insurance?
Mold from a covered sudden water loss, like a burst pipe, may be covered, often with a dollar cap. Mold from long-term leaks, humidity or neglected maintenance is usually excluded. Check your policy's mold provisions.
Is mold remediation licensed?
It depends on the state. Florida, Texas, Louisiana and New York, among others, license mold assessors and remediators. Ask the company for its license where required and for proof of insurance.
How long does mold remediation take?
A single room typically takes one to three days, plus drying time. Larger projects, crawl spaces and attics take longer. Rebuilding happens after clearance.






