
Emergency response, day or night
24/7 Emergency Water Removal & Extraction
Standing water spreads into drywall, carpet pad and subfloors within hours. Emergency water removal gets it out fast with truck-mounted and portable extractors, so more of your home can be dried instead of torn out.
- 24/7 dispatch, including holidays
- Truck-mounted & portable extractors
- Basements, slabs, carpet & hardwood
- Drying equipment set the same visit
Talk to someone now
(877) 536-1357- 1Call and describe the damage
- 2Get matched with a local company
- 3Extraction and drying get started
Free call, answered 24/7. We connect you with independent local restoration companies. How it works
- Answered 24/7/365Nights, weekends and holidays
- Every type of water lossLeaks, floods, sewage and mold
- Insurance-ready recordsPhotos, moisture logs, scope
- Local companiesCrews that serve your ZIP
When to call
When to call for emergency water removal
If any of these are happening, extraction should start today, not after the weekend.
A burst or leaking pipe
Supply lines release gallons per minute. Even after the main is off, the water already on the floor is moving into walls and subfloor.
A flooded basement
Water from a failed sump pump, water heater, groundwater or plumbing needs to be pumped and extracted before it soaks finished walls and carpet.
Water heater failure
A failed tank can release 40–80 gallons onto a garage, closet or basement floor, often overnight.
Appliance or AC overflow
Washers, dishwashers, refrigerator lines and AC drain pans leak quietly until the floor or ceiling shows it.
Frozen pipe thaw
When a frozen pipe thaws, the split releases water fast — often in an attic, wall or crawl space.
Storm water inside
Rain or floodwater that enters during a storm needs removal and, if contaminated, cleaning before drying.
What’s included
How emergency water removal works
The goal of the first visit is simple: get the water out and the drying started. Everything is photographed and measured.

-
1
Safety and source check
The technician confirms the water is stopped, checks electrical hazards and decides whether power to wet areas must stay off.
-
2
Pumping standing water
Submersible pumps handle deep water in basements and crawl spaces; extractors handle the rest.
-
3
Extraction from carpet, pad and floors
Weighted or wand extractors pull water out of carpet and pad; specialized tools pull water from hardwood and tile grout.
-
4
Moisture mapping
Meters and thermal cameras find water that's already moved under floors and into walls and adjoining rooms.
-
5
Contents protection
Furniture is blocked up or moved, and wet items are separated and documented.
-
6
Drying setup
Air movers and dehumidifiers are placed based on readings, and the daily monitoring plan begins.
Why the first few hours matter so much
Water does most of its damage by moving. In the first hour it spreads across floors and soaks into carpet pad. Within hours, drywall wicks water upward, MDF baseboards and laminate start to swell, and water slips under tile and hardwood. After a day or two, the EPA’s recommended window for drying to help prevent mold has closed. Every hour of waiting turns a drying job into a tear-out job.
Extraction is also the most efficient part of the process: physically removing water is many times faster than evaporating it with fans and dehumidifiers. The more water that comes out on the first visit, the shorter and less expensive the rest of the job.
What to do before the crew arrives
- Stop the water. Close the fixture valve or the main shut-off. For a water heater, also turn off the gas or the breaker.
- Make it safe. Turn off power to wet rooms at the panel if you can reach it from a dry spot. Stay out of standing water near outlets, cords and appliances.
- Protect what you can. Move electronics, documents, photos and rugs to a dry area. Put foil or plastic under furniture legs on wet carpet.
- Document. Take photos and video of every room, the water depth and the failed part.
- Call your insurer. Most policies expect prompt notice and reasonable steps to limit damage.
What to tell us when you call
A few details help route your call and send the right equipment:
- Your ZIP code and the type of property (house, condo, apartment, business).
- Where the water came from, if you know, and whether it’s still running.
- Roughly how many rooms or square feet are wet, and what flooring is involved.
- Whether the water is clean, from an appliance, from outside, or from a drain or toilet.
- Whether there’s a basement, crawl space or finished lower level involved.
The equipment that does the work
| Equipment | What it’s for |
|---|---|
| Truck-mounted extractor | High-volume water removal from carpet and large areas |
| Submersible pump | Deep standing water in basements, crawl spaces and garages |
| Weighted extraction tool | Pressing water out of carpet pad without removing it |
| Hardwood floor drying mats | Pulling moisture out of wood flooring from the surface |
| Moisture meters and thermal imaging | Finding hidden water in walls, under floors and in ceilings |
| Air movers and LGR dehumidifiers | Drying the structure after extraction |
The most common emergency water calls
Burst supply lines under sinks, behind toilets and to washing machines are the classic emergency, especially braided hoses past their service life. Water heaters fail without warning and can empty their tank overnight. Frozen pipes split in attics, crawl spaces and exterior walls and leak when they thaw. Sump pump failures during storms or power outages flood basements fast. And AC condensate overflows in attics show up as ceiling stains days later.
After extraction: drying and documentation
Water removal is step one. Once the water is out, the restoration company sets up drying equipment based on moisture readings and returns daily to measure progress and adjust. When readings reach a dry standard, the equipment comes out and repairs can begin. Ask for copies of the moisture logs and photos — they’re the backbone of your insurance claim. Learn more on our water damage restoration page.
How it works
From your call to a dry home
Professional water damage restoration follows the IICRC S500 standard. Here is what a properly run job looks like.
-
1
You call, we listen
Tell us where the water is, what caused it (if you know), when it started and whether it is still running. Your call is routed to an available restoration company that serves your ZIP code.
-
2
Inspection & moisture mapping
A technician confirms the source is stopped, classifies the water as clean, gray or black, and uses moisture meters and thermal imaging to find wet materials you can’t see.
-
3
Extraction & structural drying
Standing water is extracted, materials that can’t be saved are removed, and air movers and dehumidifiers dry the structure. Readings are logged every day until materials are dry.
-
4
Cleanup, records & repair
Affected areas are cleaned and treated where needed. You get photos, moisture logs and a written scope for your insurer, then repairs and rebuild can begin.
Service areas
Emergency Water Removal near you
Choose your city for local details: common causes, neighborhoods and ZIP codes served, local resources and answers to local questions.
Arizona
Florida
Georgia
Massachusetts
Texas
- Emergency Water Removal in Allen, TX
- Emergency Water Removal in Conroe, TX
- Emergency Water Removal in Denton, TX
- Emergency Water Removal in Flower Mound, TX
- Emergency Water Removal in Frisco, TX
- Emergency Water Removal in Katy, TX
- Emergency Water Removal in Kingwood, TX
- Emergency Water Removal in Lewisville, TX
- Emergency Water Removal in Magnolia, TX
- Emergency Water Removal in McKinney, TX
- Emergency Water Removal in Montgomery, TX
- Emergency Water Removal in Plano, TX
- Emergency Water Removal in Spring, TX
- Emergency Water Removal in Tomball, TX
Utah
FAQ
Emergency Water Removal FAQs
Still unsure what you need? A two-minute call usually answers it.
How fast can someone come for emergency water removal?
Calls are answered 24/7 and routed to an available restoration company that serves your ZIP code. You'll get an estimated arrival window on the call. During widespread storms or freezes, demand rises, so call as soon as you find the water.
What should I do while I wait?
Shut off the water at the fixture or main, turn off power to wet areas if you can do it from a dry spot, move valuables and electronics up and out, wipe water off wood furniture, and photograph everything. Don't use a household vacuum on water, and don't walk on wet carpet near outlets.
Is emergency water removal covered by insurance?
If the underlying loss is covered — like a burst pipe or failed water heater — emergency extraction and drying are usually part of the claim, because policies require you to prevent further damage. Outside flooding generally requires flood insurance.
Can I just use a shop vac?
A wet/dry vac is fine for a small spill on a hard floor. For water in carpet, under flooring or across rooms, professional extractors remove far more water, and moisture mapping finds what you can't see.
How much water can a restoration crew remove?
Truck-mounted extractors can remove hundreds of gallons per hour, and submersible pumps handle flooded basements. The bigger question is how much water has already absorbed into materials — that's what the drying phase addresses.
Do I need emergency water removal for a ceiling leak?
If the ceiling is stained, sagging or dripping, yes. Water collects above the drywall and in insulation. Stay out from under a sagging ceiling; a technician can safely release the water and dry the cavity.






